Proface APL3000B - Node Box PC - Manual (Page 36)

Chapter 2 System Setup
2-15
Cache xxxx-xxxx
Specifies the cache setting for each address. Select from [Disabled], [USWC Caching] (The address A000 -
AFFF and B000 - BFFF are only available.), [Write Through], [Write Protect], or [Write Back]. The factory
default setting is as follows.
A000 - AFFF Disabled
B000 - BFFF Disabled
C800 - CBFF Write Protect (VIDEO Memory)
CC00 - CFFF Write Protect
D000 - D3FF Disabled
D400 - D7FF Disabled
D800 - DBFF Disabled
DC00 - DFFF Disabled
E000 - E3FF Disabled
E400 - E7FF Write Protect (PXE)
E800 - EBFF Write Protect
EC00 - EFFF Write Protect
„ PCI Configuration
Specifies the PCI IRQ parameters. Point the cursor to the [PCI Configuration] on the [Advanced] screen and
press the [Enter] Key, so that the following screen will be displayed.
PCI IRQ line 1 to 8
Specifies the Interrupt Request Lines (IRQ) for PCI. Select from [Disabled], [Auto Select], [3], [4], [5], [7],
[10], [11], [12], [14], or [15]. The factory default setting is [Auto Select].