Mch control sub-menu – Proface APL3000B - Node Box PC User Manual
Page 40
Chapter 2 System Setup
2-19
Thermal Control Circuit
This is a function that protects the CPU’s temperature, and its setting is a situation that if it exceeds the limit
that CPU is able to work properly. Select from [Disabled], [TM1], or [TM2]. The factory default setting is
[TM1].
MCH Control Sub-Menu
Specifies the MCH control parameters. Point the cursor to the [MCH Control Sub-Menu] on the [Intel] menu
and press the [Enter] Key, so that the following screen will be displayed.
MCH Power Management Sub-Menu
Point the cursor to the [MCH Power Management Sub-Menu] on the [Intel] menu and press the [Enter] Key,
so that you can go to the Chipset set-up screen.
DDR ECC Operation
Specifies whether you use ECC memory or not. Select from [Enabled] or [Disabled]. The factory default
setting is [Enabled].
SEE