Proface APL3000B - Node Box PC - Manual (Page 49)

PS-3650A / PS-3651A Reference Manual
2-28
2.2.5 Boot
Specifies an order for boot-up devices. The boot-up devices are specified in the Boot priority order list and are
searched for from the top of the list in sequence. By using the [+] or [-] keys, change its order. To change the
device to be booted up, use the [x] key to move the device from the Boot priority order list to the Excluded
from boot order list and vice versa.
Boot priority order
Specifies the order of the boot-up devices. The factory default settings are as follows:
1: IDE MSR : IDE Master Device
2: IDE SLV : IDE Slave Device
3: SATA DEV : SATA Strage Device
4: USB FDC : USB Floppy Disk Driver
5: USB CDROM : USB CDROM (DVD ROM) Driver
6: USB HDD : USB Memory, etc.
7:
Exluded from boot order
: Other USB : Other USB media
: PCI LAN : LAN 2 (GigaBit Ether) PXE Boot ROM
: PCI : Other PCI device
• When a new hard disk or commercial USB memory which does not require boot-up is connected
and such a device is given high priority in the Boot priority order list, the system may not boot up
properly. Be sure to check the order of the devices in the Boot priority order list after you con-
nect a new device.