Proface APL3000B - Node Box PC - Manual (Page 29)

PS-3650A / PS-3651A Reference Manual
2-8
Legacy USB Support
When the USB keyboard is used under DOS, specifies an enabled/disabled state for the USB. The choice is
[Enabled] or [Disabled]. The factory default setting is [Enabled].
Enable Memory gap
Specifies an enabled/disabled state for the Memory gap. Select from [Enabled] or [Disabled]. The factory
default setting is [Disabled].
Summary screen
Specifies whether the configuration information of the running system is displayed. Select from [Enabled] or
[Disabled]. The factory default setting is [Disabled].
QuickBoot Mode
Specifies whether the system boot-up should be “QuickBoot mode”. When the choice is [Disabled], it will
execute a system test at the system starting-up. The factory default setting is [Enabled].
Extended Memory Testing
Specifies whether a test for the Extended Memory needs to be executed at the system starting-up. The test
types are listed below. The factory default setting is [Just Zero it].
[Normal] Normal test
[Just Zero it] Simple test
[None] No test
Show CMOS Checksum Error
Specifies whether an error message should be displayed when a CMOS checksum error occurs. Select from
[Enabled] or [Disabled]. The factory default setting is [Disabled].
Invert RAS Output
Specify whether to invert the RAS output. Select [Enabled] or [Disabled]. The factory default setting is
[Disabled].