Proface APL3000B - Node Box PC - Manual (Page 44)

Chapter 2 System Setup
2-23
‹Integrated Device Control Sub-Menu
Specifies whether to enable or disable USB, LAN, and PCMCIA. In [ICH Control Sub-Menu], point the
cursor to the [Integrated Device Control Sub-Menu] and press the [Enter] Key to display the following screen.
USB-Device 29, F1 only / USB-Device 29, Function 7
Specifies an enabled/disabled state for the USB device. Select from [Enabled] or [Disabled]. The factory
default setting is [Enabled].
IDE-Device 31, Function 1
Specifies an enabled/disabled state for the IDE device. Select from [Enabled] or [Disabled]. The factory
default setting is [Enabled].
AC97A-Device 31, Function 5
Specifies an enabled/disabled state for the AC97 Audio. Select from [Enabled] or [Disabled]. The factory
default setting is [Enabled].
Onboard LAN 1, 2
Specifies an enabled/disabled state for the Onboard LAN 1,2. The choice is [Enabled] or [Disabled]. The
factory default setting is [Enabled].
Onboard Cardbus Controller
Specifies an enabled/disabled state for the PCMCIA slot. The choice is [Enabled] or [Disabled]. The factory
default setting is [Enabled].