Proface APL3000B - Node Box PC - Manual (Page 65)

PS-3650A / PS-3651A Reference Manual
3-14
3.3.3 When an Error Occurs
(1) A buzzer sounds and a pop-up message is displayed.
(2) An “
×” mark appears on the icon in the System Tray, which indicates an error status, and the icon blinks.
You can see the description of the error by double-clicking the icon.
• The Error Action is performed only one time when an error is detected for each monitoring item.
• To stop the buzzer, click the [Buzzer Off] button in the pop-up message dialog box.
If the pop-up message is hidden, click the [Buzzer Off] button displayed in the [System Monitor]
screen.
• You can also display the [System Monitor] screen by pressing [Show Window] on the pop-up
message window.
• When you check the [Show this message after an hour] check box and press the [OK] button, the
pop-up message window will close and will not open for an hour.
• Once an error is detected, the System Monitor holds the “error” status (Icon display
indicating error detection). To recover from the error status, press the [Reset]
button on the [System Monitor] screen or turn off the PS-A. After that, perform
maintenance service for removing the cause of the error factor, and then turn on
the power again.
Icon display on start-ups Icon display when an error is detected.