Proface APL3000B - Node Box PC - Manual (Page 50)

Chapter 2 System Setup
2-29
2.2.6 Exit
Exit Saving Changes
Point the cursor to the [Exit Saving Changes] on the [Exit] menu and press the [Enter] Key, the current
configuration is saved and the setting procedure is ended.
Exit Discarding Changes
Point the cursor to the [Exit Discarding Changes] on the [Exit] menu and press the [Enter] Key, the current
configuration is NOT saved but the setting procedure is ended.
Load Setup Defaults
Point the cursor to the [Load Setup Defaults] on the [Exit] menu and press the [Enter] Key, all of the current
configuration is back to the factory default settings.
Discard Changes
Point the cursor to the [Discard Changes] on the [Exit] menu and press the [Enter] Key, the current modified
configuration is canceled and the previous setting values are reloaded.
Save Changes
Point the cursor to the [Save Changes] on the [Exit] menu and press the [Enter] Key, the current configuration
which you modified is saved.