ADTRAN TSU 120e - Manual (Page 5)

v
FCC Regulations Require that the Following Information be
Provided to the Customer
1. This equipment complies with Part 68 of the FCC rules. The required label
is attached to the bottom of the chassis.
2. An FCC compliant telephone cord and modular plug is provided with this
equipment. This equipment is designed to be connected to the telephone
network or premises wiring using a compatible modular jack which is Part
68 compliant. See installation instructions for details.
3. If your TSU 120 causes harm to the telephone network, the Telephone Com-
pany may discontinue your service temporarily. If possible, they will
notify you in advance. If advance notice is not practical, you will be noti-
fied as soon as possible. You will be advised of your right to file a com-
plaint with the FCC.
4. Your telephone company may make changes in its facilities, equipment,
operations, or procedures that could affect the proper operation of your
equipment. If they do, you will be given advance notice so as to give you
an opportunity to maintain uninterrupted service.
5. If you experience trouble with the equipment TSU 120, please contact
ADTRAN at (256) 963-8000 for repair/warranty information. The tele-
phone company may ask you to disconnect this equipment from the net-
work until the problem has been corrected, or until you are sure the
equipment is not malfunctioning.
6. This unit contains no user serviceable parts.
7. The following information may be required when applying to your local
telephone company for leased line facilities.
Service Type REN/SOC FIC USOC
1.544 Mbps -SF 6.0N 04DU9-BN RJ-48C
1.544 Mbps - SF and B8ZS 6.0N 04DU9-DN RJ-48C
1.544 Mbps - ESF 6.0N 04DU9-1KN RJ-48C
1.544 Mbps - ESF and B8ZS 6.0N 04DU9-1SN RJ-48C