Proface APL3000B - Node Box PC - Manual (Page 73)

PS-3650A/PS-3651A Series Hardware Manual
4-4
(4) Remove dust on the filter using a cleaner etc. If stubborn dirt or stains are present, wash the filter with a
neutral detergent.
(5) Install the filter and tighten the screws of the fan cover.
(6) Install the Fan Unit in the PS-A unit.
• Do not wring the filter to dry it.
• When drying the filter, dry it without exposing it to direct sunlight.
• Dry the filter completely before reattaching it.
• Be sure the fan cover is securely attached to the PS-A unit. This is to ensure the
fan cover does not fall while the PS-A unit is operating.
• When installing the Fan Unit in the PS-A unit, be sure to keep the cable on the left
side of the back of the PS- A unit so that the fan cannot come into contact with it.
Filter
Filter