Proface APL3000B - Node Box PC - Manual (Page 62)

Chapter 3 Installation and Wiring
3-17
3.2.6 USB Holder Attachment/Removal
When using a USB device, attaching the USB holder to the USB Interface located on the side of the PS-A unit
prevents the USB cable Interface from becoming disconnected.
„ Attachment
(1) Attach the USB holder to the USB Interface on the side of the PS-A unit.
Hook the upper pick of the USB holder to the attachment hole of the PS-A unit and then insert the lower
pick as shown below to attach the USB holder.
(2) Insert the USB cable into the USB Interface.
(3) Insert the USB cover into the tab of the USB holder to attach the USB cable.
If installing a second USB cable, repeat the steps (2) and (3).
Pick
USB Cable
Tab
USB Cover