Proface APL3000B - Node Box PC User Manual
Page 53
PS-3650A/PS-3651A Series Hardware Manual
3-8
(3)
Install the Main Memory where the following figure shows. Insert the optional DIM module into the
connector completely, then gently press it downward until it is locked into the stopper.
(4)
Reinstall the Fan Unit and attach with two screws. The torque required to tighten these screws is 0.5 to
0.6N•m.
PS-3651A Series
(1)
Turn OFF the power switch of the PS-A unit and remove the power cable. Place the PS-A unit on a flat,
level surface facing the display face downwards.
(2)
Unscrew the screws (2) as you see on the following figure, and remove the Memory Slot Cover.
1
2
Connector
Stopper
Main Memory
Main Memory (DIM Module)