Proface APL3000B - Node Box PC - Manual (Page 17)

PS-3650A/PS-3651A Series Hardware Manual
1-4
1.3 Part Names and Functions
The following images are of a PS-3650A/PS-3651A Series unit.
A: Power LED / RAS Status lamp (POWER)
This status LED indicates the power current and
operation status. The following table shows the
display colors and corresponding status.
B: HDD/IDE Access lamp (DISK)
C: Front Cover
D: Hardware Reset Switch (RESET)
E: Front USB Interface (USB)
1 port, USB 1.1 Compatible.
Uses a “Type-A” connector.
B
A
C
Front
(Common in PS-3650A/PS-3651A Series)
D
E
LED Status
Green (lit) Normal operation (power is ON).
Green
(blinking) System is NOT running (Soft OFF
state).
Orange (lit) System monitor error.
Orange/ Red
(blinking)
Backlight error.
Not lit Power is OFF.
LED Status
Green (lit) HDD or IDE is accessed.
Not lit Neither HDD nor IDE is accessed.
Orange (lit)
PS-A unit is in operation with backup
battery
Red (lit)
PS-A unit is in operation with backup
battery
Power supply voltage DC5V ±5%
Output current
Each port:
500mA (max.)
4 ports total:
500mA (max.)
Maximum
communication distance
5m