Proface APL3000B - Node Box PC - Manual (Page 55)

PS-3650A/PS-3651A Series Hardware Manual
3-10
(3) Unscrew the Expansion Board Cover’s screws (2) and remove the Expansion Board Cover.
(4) Unscrew the blank panel screw and take out the blank panel.
(5) Insert the PCI board into the Expansion Board connector and replace the blank panel screw to attach the
PCI board. The torque required to tighten a screw is 0.5 to 0.6N•m.
(6) Reinstall the Expansion Board Cover and Expansion Board Support. The torque required to tighten each
of the screws is 0.5 to 0.6N•m.
blank panel
PCI Board