Proface APL3000B - Node Box PC - Manual (Page 35)

PS-3650A/PS-3651A Series Hardware Manual
2-14
2.4 DIP Switches
The DIP Switches are mounted on the circuit board under the Fan Unit or the Memory Slot Cover. For details
on how to remove the Fan Unit or the Memory Slot Cover, refer to the following section.
„ DIP Switch Locations
SEE 3.2.1 Main Memory Installation (page 3-7)
• Make sure to turn off the power supply before using the DIP Switches. Adjusting
the DIP Switches while power is supplied may cause a unit malfunction or dam-
age.
• Be sure to confirm which settings will be used by other connected devices and
set the DIP Switches accordingly. Failure to do so can result in a unit malfunction
or damage.
Switch
Location
Switch Name Description
A System Set SW1
10-point DIP Switch. For the switches details, see „ System Set
SW 1 (page2-15).
B
Serial Mode Select
SW
10-point DIP Switch. Designates COM1 communication settings.
For the switches details, see „ Serial Mode Select SW (page2-
17).
C System Set SW2
4-point DIP Switch. For the switches details, see „ System Set
SW 2 (page2-19).