Maple Systems OMI5100A-CE - Manual (Page 32)

OMI5000 Series Operating Manual 28
Maple Systems 1010-1012 Rev 02 www.maplesystems.com
Chapter 5 - Using Third Party Software to Configure the
OMI5000 Series Open HMIs
Indusoft WebStudio
Although you can use any application development software that is compatible with Windows CE 5.0
Maple systems recommends WebStudio (with the processor set to ARMv4i). For more information, visit
our website at
www.maplesystems.com .
Other HMI Configuration Software
There are many companies that offer HMI configuration software that is compatible with Windows CE
5.0. We have not tested any of this software with the OMI5000 Series Open HMIs. Below is a partial list:

Iconics Embedded Genesis32

Rockwell RSView Machine Edition

GE Fanuc Proficy View Machine Edition