Maple Systems OMI5100A-CE - Manual (Page 21)

17
Chapter 1 – Hardware Configuration
Maple Systems 1010-1012 Rev 02 www.maplesystems.com
Boot Loader Mode
This mode allows users to load a new Windows CE image file.
 To load a new image file from an SD card:
1. Turn off Open HMI.
2. Load the image onto an SD card.
3. Insert SD card into unit or SD card reader.
4. Set DIP SW3 to ON.
5. Reapply power to the OMI5000 Series Open HMI. Open HMI will boot in Boot Loader Mode.
6. The image file will automatically load and Open HMI automatically reboots when the download
is complete. While loading the CPU LED will flash continuously. The download takes
approximately 10 minutes to complete.
7. Be sure to reset all DIP switches to OFF before turning on the Open HMI the next time, or it will
load in Boot Loader Mode.
 Contact Maple Systems for Information on the operating system image files