Maple Systems OMI5100A-CE - Manual (Page 14)

OMI5000 Series Operating Manual 10
Maple Systems 1010-1012 Rev 02 www.maplesystems.com
13. Select the CECP icon from the Windows Desktop.
14. Select the Registry tab from the System Settings dialog box.
15. Click Save registry.
16. Click OK.
17. Reboot the Open HMI to make settings take effect.
USB Host Port
The USB 1.1 Host Port has the following uses:

Connect to USB mouse.

Connect to USB keyboard.

Connect to USB mass storage device that has been connected to an external power source (or
USB flash drive). Note: When installed, the USB flash drive will be recognized as a HardDrive in
Windows Explorer.
USB Client Port
The USB 2.0 client port can be used to connect a USB cable between the OMI5000 HMI and a computer
to download projects or data files. Maple Systems provides a USB download cable that has been
approved for these units:

USB Download Cable (Maple P/N 7431-0115)
Before you can download files from your computer using the USB connection, you must install a USB
driver onto your computer.