Progressive International Electronics PIcon Console User Manual
Page 33

PIcon
Program & Report
Rev 2.0
June 2006
Page 29
Mode 12 — Clear Resettable Totals
(Manager only)
Mode 12 is used to reset resettable totals by clearing them to zero. To enter this mode from
the M 0, mode number prompt, enter <12> on the keypad and press
The display will show Press Clear. If you wish to zero all resettable totals, proceed by
pressing
Press any key to exit Mode 12.
Mode 50 — Select Language
(Manager only)
To enter this mode from the M 0, mode number prompt, enter <50> on the keypad and press
pertains to printed reports and some display prompts.
Press