Progressive International Electronics PIcon Console - Manual (Page 27)

PIcon Program & Report
Rev 2.0 June 2006 Page 23
Mode 4 — Clock/Calendar (Manager only)
Mode 4 allows the setting of time, date and year. To enter mode 4 from the M 0, mode
number prompt, press <4> and press . The PIcon is now in programming Mode
4.
Time — Time already set in the PIcon will be displayed. To change the time, enter the
new time on the numeric keypad in 24 hour format. The new time will appear in the
display as it is entered. Seconds are not entered and will be automatically set as 00.
Press and the time will be updated in the PIcon. Press again to
proceed to program the date.
Date — Date already set in PIcon will be displayed under DT. You may change the date
by entering the new date on the numeric keypad in mmdd format. The new date will
appear in the display as it is entered. Press and the date will be updated in the
PIcon. Press again to proceed to program the year.
Year — Year already set in PIcon will be displayed under YR. Date may be changed by
entering the new year on the numeric keypad in four digits. The new year will display as
it is being entered. Press <ENTER> and the year will be updated.
To exit Mode 4, press the key or the key. M 0, the mode entry
prompt, will appear on the display. To exit programming mode completely and return to
operator mode, press the key again.