Introduction – Progressive International Electronics PIcon Console User Manual
Page 21

PIcon
Program & Report
Rev 2.0
June 2006
Page 17
PROGRAM & REPORT
Introduction
The Program & Report Section describes the operation and resulting information provided by the
PIcon program and report functions. These functions allow the manager to configure the PIcon
for the specific type of operation desired and to retrieve important data collected. This
management information is protected by the use of a unique Manager PIN Code (factory default
— 2422). This Manager PIN Code may be changed by the manager at any time through the use
of one of the program and report functions. Manager Modes 10 and 11 may be accessed through
operator’s PIN code (default 1111).
As you review this section of the manual, please refer to Diagram: PIcon Key and Indicator
Location, located in previous Operator Introduction section, for general locations of the various
keys, indicators and display. While using program and report functions, the fields on the display
will vary from function to function, depending upon the type of data being displayed or
requested.
Refer to Program & Report in the Quick Reference Guide.