Progressive International Electronics PIcon Console - Manual (Page 29)

PIcon Program & Report
Rev 2.0 June 2006 Page 25
Mode 10 — Read Reports (Manager/Operator)
In Mode 10, totals reports may be generated and displayed. To enter this mode from the M 0,
mode number prompt, enter <10> on the keypad and press .
The display will show an R 0, prompting you to enter a report type code. From the following
reports, select the one you would like displayed.
1 Resettable Totals
2 Non-Resettable Totals
3 Shift 0 Totals (current shift)
4 Shift 1 Totals
5 Shift 2 Totals
6 Shift 3 Totals
7 Polled Dispenser Totals
Select the report number and enter it on the PIcon keypad; then press . The
beginning data for the report is shown in the display. Use the following keys to scroll
through the report.
Display next product totals
Display the volume total
Display the cash total
Display the credit total
Exit Mode 10