Progressive International Electronics PIcon Console - Manual (Page 22)

PIcon Program & Report
Rev 2.0 June 2006 Page 18
PIN Code Access
To access PIcon program and report features, a sequence utilizing a valid PIN Code must first be
entered. Access is divided into two categories — manager and operator. The manager, using a
Manager PIN Code, has access to all program and report functions. Report functions (Modes 10
and 11) are also available to the operator, who uses an Operator PIN Code. Manager and
operator access are described below.
Manager Access
Entry of the correct Manager PIN Code allows access to all program and report functions.
First, press key. The display will prompt you to enter your PIN Code. Enter this
PIN Code on the numeric keypad. (This number, with a maximum of four digits, is stored in
the PIcon. Its purpose is to limit access to PIcon program and report data. The number 2422
is the factory default value for the Manager PIN Code.) Next, press the key. M 0
will appear in the display, prompting you to enter the desired function mode number on the
numeric keypad. (See mode descriptions.) Press again to generate the requested
program & report function sequence. At this point, if you wish to return to the operator
mode, press the key to exit from manager modes.
Operator Access
Access to report functions is accomplished through the entry of a valid Operator PIN Code.
First, press the key. You will be prompted by the display to enter your PIN Code.
Enter your Operator PIN Code on the numeric keypad. (This number, with a maximum of
four digits, is stored in the PIcon. Its purpose is to limit access to PIcon report data. The
number 1111 is the factory default value for the Operator PIN Code.) Next, press the
key. M 0 will appear in the display, prompting you to enter the desired function
mode number on the numeric keypad. Press again to generate the requested
program & report function sequence. Press the key to exit current mode.