Progressive International Electronics PIcon Console - Manual (Page 10)

PIcon Installation and Operation
Rev 2.0 June 2006 Page 6
Installation Warnings
Warning: Installation must comply with the National Electrical Code, as well as Federal, State,
Local and all applicable codes.
Warning: High voltages are present in this equipment. Disconnect all power before installing
to prevent personal injury or equipment damage.
Warning: Do not install PIcon units in a volatile, combustible or explosive atmosphere. All
PIcon units must be protected from severe vibration, extreme temperatures and excessive
humidity.
Any peripheral equipment is to be installed over a non-hazardous location.
Any peripheral equipment connected to the PIcon must be UL listed and using standard
connection communication.
The PIcon must be plugged into a dedicated 115 VAC wall socket with bonded earth ground.