IEI Integration AFL-F08A v1.01 - Manual (Page 52)

AFL-F08A Panel PC
Page 40
4.1 System Maintenance Introduction
If the components of the AFL-F08A fail they must be replaced. Components that can be
replaced include:
ƒ CF Module
ƒ Bluetooth module
ƒ Wireless LAN module
ƒ SO-DIMM module
Please contact the system reseller or vendor to purchase the replacement parts. Back
cover removal instructions for the AFL-F08A are described below.
4.2 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the maintenance of the
AFL-F08A may result in permanent damage to the AFL-F08A and
severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the AFL-F08A. Dry climates are especially susceptible to ESD. It is therefore
critical that whenever the AFL-F08A is accessed internally, or any other electrical
component is handled, the following anti-static precautions are strictly adhered to.
ƒ Wear an anti-static wristband: - Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
ƒ Self-grounding: - Before handling the board touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
ƒ Use an anti-static pad: - When configuring the AFL-F08A, place it on an
antic-static pad. This reduces the possibility of ESD damaging the AFL-F08A.
ƒ Only handle the edges of the PCB: - When handling the PCB, hold the PCB
by the edges.