9 bottom panel connectors, 1 lan connection, Ottom – IEI Integration AFL-F08A v1.01 User Manual

Page 46: Anel, Onnectors, Figure 3-20: install into a rack/cabinet

AFL-F08A Panel PC

Page 34

Figure 3-20: Install into a Rack/Cabinet

Step 5:

Once the AFL-F08A with the attached rack/cabinet bracket has been properly

inserted into the rack or cabinet, secure the front of the rack/cabinet bracket to

the front of the rack or cabinet (Figure 3-20).

Step 5:

3.9 Bottom Panel Connectors

This section provides and overview of the connectors on the bottom panel.

3.9.1 LAN Connection

There are two external RJ-45 LAN connectors. The RJ-45 connector enables connection

to an external network. To connect a LAN cable with an RJ-45 connector, please follow

the instructions below.

Step 6:

Locate the RJ-45 connectors

on the bottom panel of the AFL-F08A.

Step 7:

Align the connectors.

Align the RJ-45 connector on the LAN cable with one of

the RJ-45 connectors on the bottom panel of the AFL-F08A.