IEI Integration ECN-360A-HM65 - Manual (Page 31)

ECN-360A-HM65 Em b e d d e d S ys te m
P a g e 18
S te p 2: Plug the audio plug into the audio jack. Plug the audio plug into the audio
jack. If the plug on your speakers is different, an adapter will need to be used to
plug them into the audio jack. The audio jack on the ECN-360A-HM65 is a
line-out port which connects to a headphone or a speaker.
Figure 3-6: Audio Connector
S te p 3: Check audio clarity. Check that the sound is coming through the right speakers
by adjusting the balance front to rear and left to right.
3.6.2 HDMI De vic e Co n n e c tio n
The HDMI connector transmits a digital signal to compatible HDMI display devices such
as a TV or computer screen. To connect the HDMI cable to the ECN-360A-HM65, follow
the steps below.
S te p 1: Locate the HDMI connector. The location is shown in Chapter 1.
S te p 2: Align the connector. Align the HDMI connector with the HDMI port. Make sure
the orientation of the connector is correct.