2 memory module replacement – IEI Integration uIBX-210-CV-N2600 User Manual

Page 59

u IBX-210-CV-N2600 Em b e d d e d S ys te m

P a g e 46

S te p 9:

Connect the SATA connector (JSATA2).

S te p 10:

Replace the back cover and secure it using eight (8) previously removed

retention screws.

5.4.2 Me m o ry Mo d u le Re p la c e m e n t

If the memory module fails, follow the instructions below to replace the memory module.

S te p 1:

Remove eight (8) retention screws from the back cover. See Section 5.4.1.

S te p 2:

Remove HDD module. See Section 5.4.1.

S te p 3:

Locate the memory module indicated below.

Figure 5-6: uIBX-210-CV-N2600 SO-DIMM Socket Location

S te p 4:

Remove the DDR3 memory module by pulling both the spring retainer clips

outward from the socket.

S te p 5:

Grasp the DDR3 memory module by the edges and carefully pull it out of the

socket.

S te p 6:

Install the new DDR3 memory module by pushing it into the socket at an angle