IEI Integration uIBX-210-CV-N2600 - Manual (Page 25)

u IBX-210-CV-N2600 Em b e d d e d S ys te m
P a g e 12
3.1 In s ta lla tio n P re c a u tio n s
During installation, be aware of the precautions below:
 Read the user manual: The user manual provides a complete description of
the uIBX-210-CV-N2600, installation instructions and configuration options.
 DANGER! Disconnect Power: Power to the uIBX-210-CV-N2600 must be
disconnected during the installation process, or before any attempt is made to
access the rear panel. Electric shock and personal injury might occur if the
rear panel of the uIBX-210-CV-N2600 is opened while the power cord is still
connected to an electrical outlet.
 Qualified Personnel: The uIBX-210-CV-N2600 must be installed and
operated only by trained and qualified personnel. Maintenance, upgrades, or
repairs may only be carried out by qualified personnel who are familiar with
the associated dangers.
 Grounding: The uIBX-210-CV-N2600 should be properly grounded. The
voltage feeds must not be overloaded. Adjust the cabling and provide external
overcharge protection per the electrical values indicated on the label attached
to the back of the uIBX-210-CV-N2600.
3.2 In s ta lla tio n a n d Co n fig u ra tio n S te ps
The following installation steps must be followed.
S te p 1: Unpack the uIBX-210-CV-N2600.
S te p 2: Configure the system.
S te p 3: Connect peripheral devices to the uIBX-210-CV-N2600.
S te p 4: Mount the uIBX-210-CV-N2600. S te p 0:
3.3 Wi-Fi An te n n a In s ta lla tio n (Wi-Fi Mo d e l On ly)
To install the Wi-Fi antennas to the uIBX-210-CV-N2600 series for efficient wireless
network transmission, follow the steps below.
S te p 1: Locate the antenna connectors on the rear panel of the embedded system.