5 rs-422/485 serial port connection, Figure 3-24: db-9 serial port connector – IEI Integration uIBX-210-CV-N2600 User Manual

Page 42

u IBX-210-CV-N2600 Em b e d d e d S ys te m

P a g e 29

Figure 3-24: DB-9 Serial Port Connector

S te p 3:

Secure the connector. Secure the serial device connector to the external

interface by tightening the two retention screws on either side of the connector.

S tep 0:

3.8.5 RS -422/485 S e ria l P o rt Co n n e c tio n

There is one RS-422/485 serial port of the uIBX-210-CV-N2600 for serial device

connection. Follow the steps below to connect a serial device to the RS-422/485 serial

port of the uIBX-210-CV-N2600.

S te p 1:

Locate the RS-422/RS485 connector. The location of the RS-422/485 connector

is shown in Figure 1-2.

S te p 2:

Connect the RS-422/485 cable to the RS-422/485 connector. The

RS-422/485 cable can be bought from IEI and is shown in Figure 3-25.