IEI Integration uIBX-210-CV-N2600 - Manual (Page 22)

u IBX-210-CV-N2600 Em b e d d e d S ys te m
P a g e 9
2.1 An ti-s ta tic P re c a u tio n s
WARNING:
Failure to take ESD precautions during installation may result in
permanent damage to the uIBX-210-CV-N2600 and severe injury to
the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the uIBX-210-CV-N2600. Dry climates are especially susceptible to ESD. It is
therefore critical that whenever the uIBX-210-CV-N2600 or any other electrical component
is handled, the following anti-static precautions are strictly adhered to.
 Wear an anti-static wristband: Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
 Self-grounding: Before handling the board, touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
 Use an anti-static pad: When configuring the uIBX-210-CV-N2600, place it
on an antic-static pad. This reduces the possibility of ESD damaging the
uIBX-210-CV-N2600.
2.2 Un pa c kin g P re c a u tio n s
When the uIBX-210-CV-N2600 is unpacked, please do the following:
 Follow the anti-static precautions outlined in Section 2.1.
 Make sure the packing box is facing upwards so the uIBX-210-CV-N2600
does not fall out of the box.
 Make sure all the components shown in Section 2.3 are present.