IEI Integration ECW-281B-N270-WT v2.00 User Manual

Page 151

ECW-281B Embedded System

Page 135

Step 1:

Put the recovery CD in the optical drive of the system.

Step 2:

Boot the system from recovery CD. When prompted, press any key to boot

from the recovery CD. It will take a while to launch the recovery tool. Please be

patient!

Figure B-2: Launching the Recovery Tool

Step 3:

The recovery tool setup menu is shown as below.

Figure B-3: Recovery Tool Setup Menu

Step 4:

Press <5> then .

This manual is related to the following products: