1 so-dimm replacement – IEI Integration ECW-281B-N270-WT v2.00 User Manual
Page 138
ECW-281B Embedded System
Page 122
7.3.1 SO-DIMM Replacement
WARNING:
Using incorrectly specified SO-DIMM may cause permanently damage
the ECW-281B/281B2-R20. Please make sure the purchased
SO-DIMM complies with the memory specifications of the
ECW-281B/281B2-R20.
To replace a SO-DIMM memory module into a SO-DIMM socket, please follow the steps
below.
Step 1:
Remove the bottom surface panel. Place the ECW-281B/281B2-R20 on an
anti-static pad with the bottom panel facing up and the bottom surface removed.
(see Section
838H838H838H
4.2.3).
Step 2:
Locate the SO-DIMM (
839H839H839H
Figure 7-1).
Figure 7-1: SO-DIMM Cover Plate
Step 3:
Remove the SO-DIMM by releasing the arms on the SO-DIMM socket.
Step 4:
Align the new SO-DIMM with the socket. The SO-DIMM must be oriented in
such a way that the notch in the middle of the SO-DIMM must be aligned with
the plastic bridge in the socket (
840H840H840H
Figure 7-2).