B.1 one key recovery introduction – IEI Integration ECW-281B-N270-WT v2.00 User Manual
Page 146
ECW-281B Embedded System
Page 130
B.1 One Key Recovery Introduction
The IEI one key recovery is an easy-to-use front end for the Norton Ghost system backup
and recovery tool. The one key recovery provides quick and easy shortcuts for creating a
backup and reverting to that backup or for reverting to the factory default settings.
The IEI One Key Recovery tool menu is shown below.
Figure B-1: IEI One Key Recovery Tool Menu
Prior to using the IEI One Key Recovery tool (as shown in
761H761H843H843H843H
Figure B-1) to backup or
restore Windows system, five setup procedures are required.
1. Hardware and BIOS setup (see Section
762H762H844H844H844H
B.2.1)
2. Create partitions (see Section
763H763H845H845H845H
B.2.2)
3. Install operating system, drivers and system applications (see Section
764H764H846H846H846H
B.2.3)
4. Build-up recovery partition (see Section
765H765H847H847H847H
B.2.4)
5. Create factory default image (see Section
766H766H848H848H848H
B.2.5)
After completing the five initial setup procedures as described above, users can access
the recovery tool by pressing <F3> while booting up the system. The detailed information
of each function is described in Section
767H767H849H849H849H
B.4.
NOTE:
The initial setup procedures for Linux system are described in
Section
768H768H850H850H850H
B.3.