ZOLL Propaq M Rev A - Manual (Page 32)

C HAPTER 1 M AINTENANCE T ESTS
28 9650-0804-01 Rev. A
EtCO
2
Test
Tools Needed CO
2
sampling line airway adapter
Test Setup None
Do this... Observe this... Pass/Fail
1. On Propaq M, install the airway adapter
set and sampling line in the connector at
the side of the unit.
2.
Press the CO
2
quick access key ( ) to
activate the CO
2
trace.
The CO
2
trace is on the display. o o
3. On Propaq M, gently blow into the airway
adapter set while observing the display. The CO
2
waveform changes on the
display.
o o
CO
2
CO
2