Vestil CC-30-MC - Manual (Page 36)

35 Help Line: 800-363-2488 October 15
th
, 2001
INSTALLATION (continued)
1
2
3
A
B
• If the chute were to become snagged on the building
face during the lifting operation, the lifting device and
cable assemblies could become overloaded.
• The overload could lead to a collapse of the chute
system. A collapsing chute system can seriously injure
or kill.
• As the chute is raised, have a spotter make sure the
chute does not become snagged on the building face.
WARNING
!
1. Raise the chute length.
2. Position another section below the suspended
chute.
3. Lower the suspended chute length into the
section.
4. Connect clip of cable assembly (A) to U-bolt (B).
5. Repeat with the cable assembly on opposite side.
6. Raise the chute length.