Vestil CC-30-MC - Manual (Page 13)

October 15
th
, 2001 Help Line: 800-363-2488 12
THE CABLE ASSEMBLY (continued)
ATTACHMENT TO THE CHUTE WALL
Prior to installing a chute section, ensure that two cable assemblies are fastened securely to the
chute wall.
Please note that Wraparound
® sections are usually shipped flat (from the factory), without the
cable assemblies attached to the chute wall. This shipping method keeps the sections from
shifting in transport.
Attach cable assemblies to the chute wall using the instructions shown below and on the next
page (these instructions are included with every pair of packaged cable assemblies).
• A loosely attached U-Bolt could undo and cause the failure and
collapse of the chute.
• A falling chute system can cause serious injury and death.
• Attach each cable assembly to the chute wall, per the diagram
enclosed with every cable assembly bag (see next page).
• To further demonstrate the correct attachment, factory staff have
fitted the uppermost chute section in the crate with its cable
assemblies.
WARNING
!