Vestil CC-30-MC - Manual (Page 14)

13 Help Line: 800-363-2488 October 15
th
, 2001
INSTRUCTIONS:
1. Open the bag
2. Unravel the two cable assemblies – put one aside
3. Undo the 2 Dome Nuts
4. Remove the Backing Plate from the U-Bolt
5. Force U-Bolt through holes in the chute wall
6. Reach inside the chute to slip Backing Plate over the U-Bolt ends
7. Replace the 2 Dome Nuts – Hand tighten until flush with U-Bolts ends
8. Tighten the Hex Nuts using the supplied wrench
9. Repeat steps 3 to 8 with the second cable assembly
THE CABLE ASSEMBLY (continued)
ATTACHMENT TO THE CHUTE WALL (continued)
U-Bolt Installation Instructions
LEAVE CABLE ASSEMBLIES FASTENED TO THE CHUTE SECTION UNTIL THEY REQUIRE REPLACEMENT DUE TO WEAR & TEAR OR ABUSE
Chute Wall
Backing Plate
Hex Nut
U-Bolt
Wire Cable
Lock Washer
Washer
Dome Nut
(INTERIOR VIEW OF THE
CHUTE)
(EXTERIOR VIEW OF THE
CHUTE)