Vanguard EZCT-S2 - Manual (Page 53)

REV 3 EZCT S2 USER’S MANUAL
49
4.3 Setting the Clock
To set the EZCT S2’s internal clock:
a. Start from the “START-UP” menu:
Press the [2] key (SETUP).
b. The following screen will be displayed:
Press the [4] key (NEXT PAGE).
c. The following screen will be displayed:
Press the [4] key (NEXT PAGE).
d. The following screen will be displayed:
Press the [1] key (SET TIME).
e. The following screen will be displayed:
Enter the month, date, time, hours, minutes, and seconds (in 24-hour format) using the
alpha-numeric keypad. When the last digit is entered, the clock will be set and you will
be returned to the “START-UP” menu.
ENTER
MM-DD-YY HH:MM:SS
1. SET TIME
2. BURIED CT IN DELTA
1. RECORD DIRECTORY
2. ERASE RECORD
3. KNEE POINT MARKER
4. NEXT PAGE
1. RECORD ID
2. PRINT RECORD
3. RESTORE RECORD
4. NEXT PAGE
1. RUN TEST 12/04/09
2. SETUP 11:11:11
3. TEST PLANS
4. DIAGNOSTIC