Vanguard EZCT-S2 - Manual (Page 44)

EZCT S2 USER’S MANUAL REV 3
40
When the test has finished, the following screen will be displayed:
Press the
[1]
key (YES) to save the record.
The following screen will be displayed momentarily:
Then the following confirmation screen will be displayed:
Press any key to return to the “START-UP” menu.
3. UNLOAD TEST PLAN
Press the [3] key to unload the test plan and run a test without a test plan. This
will unload the test plan from the working memory and bring up the standard
“RUN TEST” menu. Please see section 3.2.2, step b.
c. The following screen will be displayed:
Press the [ENTER] key.
d. The following screen will be displayed:
Use the alpha-numeric keys on the keypad to enter a test note and press the [ENTER]
key.
e. The following confirmation screen will be displayed showing the test parameters:
HOOK CABLES TO CT:
X1 CABLE to CT-X1
X2 CABLE to CT-X2
“ENTER” TO CONTINUE
ENTER TEST 1 NOTE:
↑/↓ TO POSITION
“ENTER” TO ACCEPT
RECORD NUMBER 2
HAS BEEN SAVED!
SAVING RECORD...
PLEASE WAIT...
SAVE THIS RECORD?
1.YES
2.NO