Vanguard EZCT-S2 - Manual (Page 47)

REV 3 EZCT S2 USER’S MANUAL
43
3.4.7. Unloading a Test Plan from the Working Memory
To unload the test plan from the working memory and clear all the test plan parameters:
a. Start from the “START-UP” menu:
Press the [3] key (TEST PLANS).
b. The following screen will be displayed:
Press the [2] key (UNLOAD TEST PLAN).
c. The following screen will be displayed:
Press any key to return to the “START-UP” menu.
TEST PLAN UNLOADED!
1. LOAD TEST PLAN
2. UNLOAD TEST PLAN
3. PLAN DIRECTORY
4. NEXT PAGE
1. RUN TEST 12/04/09
2. SETUP 10:25:35
3. TEST PLANS
4. DIAGNOSTIC