Vanguard EZCT-2000A User Manual
Page 49
REV 1 EZCT-2000A USER’S MANUAL
45
Continue with the steps below:
1. ERASE SINGLE REC.
Press the
[1]
key if you would like to erase a single record. The following screen
will be displayed:
Type the record number to be erased and press the
[ENTER]
key.
NOTES
• You can press the
[STOP]
key to cancel the process.
• If you do not know the record number, you can first print a test
record directory using the instructions in section 3.4.4.
The following screen will be displayed momentarily:
Then the following confirmation screen will be displayed:
Press any key to return to the “START-UP” menu.
Record number 1
Erased!
ERASING RECORD
NUMBER: 01
PLEASE WAIT...
ERASE RECORD
NUMBER:
ERASE RECORD
1.
ERASE SINGLE REC.
2.
ERASE ALL RECORDS
- Resistor Transducer Adapter 9095-UC (7 pages)
- Accu-Ohm 200 S2 (4 pages)
- Accu-Trans (28 pages)
- ATO-400 (43 pages)
- ATO-400P (44 pages)
- Auto-Ohm (22 pages)
- Auto-Ohm 100_200 s2 (31 pages)
- Auto‐Ohm 200 S3 (66 pages)
- DMOM-100 (35 pages)
- DMOM-100_200 s2 (42 pages)
- DMOM-200 (33 pages)
- Herculito (17 pages)
- ATRT-01 S2 (59 pages)
- ATRT-01_01B S3 (88 pages)
- ATRT-01_01B_01D (31 pages)
- ATRT-03_03A (114 pages)
- ATRT-03_03A S2 (147 pages)
- CVT-765 (46 pages)
- Tri-Phase (155 pages)
- CBCT (14 pages)
- CBPS-300 (16 pages)
- CT-3500 (24 pages)
- CT-3500 S2 (53 pages)
- CT-6500 (69 pages)
- CT-6500 S2 (82 pages)
- CT-7000 (83 pages)
- CT-7000 S2 (108 pages)
- CT-7000 S3 (137 pages)
- CT-7500 (76 pages)
- CT-7500 S2 (110 pages)
- CT-8000 (120 pages)
- CT-8000 S3 (145 pages)
- DigiTMR (86 pages)
- DigiTMR S2 (123 pages)
- DigiTMR S2 PC (31 pages)
- MCCB-250 (17 pages)
- UPS S2 (13 pages)
- EZCT-2000 (68 pages)
- EZCT-2000 (45 pages)
- EZCT-2000B (118 pages)
- EZCT-2000C Plus (119 pages)
- EZCT-S2 (66 pages)
- EZCT-S2A (98 pages)
- IRM-5000P (58 pages)