Vanguard EZCT-2000A - Manual (Page 35)

REV 1 EZCT-2000A USER’S MANUAL
31
3.4.2. Restoring and Printing a Test Record From a USB Flash Drive
You can restore a test record from a USB Flash drive to the EZCT-2000A’s working memory
using the steps below:
a. Make sure the USB Flash drive containing the test record(s) is inserted in the EZCT-
2000A’s USB Flash drive port (“USB MEM” port). Then start from the “START-UP” menu:
Press the [2] key (SETUP).
b. The following screen will be displayed:
Press the [4] key (SAVE/RES RECORD).
c. The following screen will be displayed:
Press the
[1]
key (RESTORE RECORD).
d. The following screen will be displayed:
Press the [2] key (THUMB DRIVE).
e. The following screen will be displayed:
1. INTERNAL STORAGE
2. THUMB DRIVE
1. RESTORE RECORD
2. COPY TO THUMB DRIVE
1. RECORD ID
2. PRINT RECORD
3. RECORD DIRECTORY
4. SAVE/RES RECORD
5. ERASE RECORD
6. NEXT PAGE
1. RUN TEST 02/14/10
2. SETUP 07:39:39
3. TEST PLANS
4. DIAGNOSTIC