Vanguard EZCT-2000A - Manual (Page 21)

REV 1 EZCT-2000A USER’S MANUAL
17
e. If the selected test included an excitation test, the following screen will be displayed:
Select the maximum test current for the excitation test by pressing the corresponding
key (
[1] - [6] ).
NOTE
Most CT’s will saturate before the excitation current reaches 1A. To reduce
stress on CT’s, a maximum test current of 1A is recommended.
f. If the selected test included a ratio test, the following screen will be displayed:
1. YES
Press the [1] key if you would like to enter the CT nameplate values. The
following screen will be displayed:
Type the first number using the keypad.
You can press the [CLEAR] key to restart a field entry if necessary.
Press the [ENTER] key. The following screen will be display ed:
ENTER PLATE RATIO:
0 :
XFMR NAME PLATE RAT.
1.
YES
2. NO
SET TEST CURRENT:
1.
0.2A
2. 0.5A
3. 1A
4. 2A
5. 5A
6. 10A