Vanguard EZCT-2000A User Manual
Page 43
REV 1 EZCT-2000A USER’S MANUAL
39
3.4.5. Printing a Directory of Test Records Stored in a USB Flash Drive
You can print a directory of all the test records in a USB Flash drive using the steps below:
a. Make sure the USB Flash drive is inserted in the EZCT-2000A’s USB Flash drive port
(“USB MEM” port). Then start from the “START-UP” menu:
Press the
[2]
key (SETUP).
b. The following screen will be displayed:
Press the
[3]
key (RECORD DIRECTORY).
c. The following screen will be displayed:
Press the
[2]
key (THUMB DRIVE DIR).
d. The following screen will be displayed while the directory is printed:
When printing is finished, you will be returned to the “START-UP” menu. A sample
directory printout is shown in Figure 10.
PRINTING DIRECTORY
1. INTERNAL DIRECTORY
2. THUMB DRIVE DIR
1.
RECORD ID
2.
PRINT RECORD
3.
RECORD DIRECTORY
4.
SAVE/RES RECORD
5.
ERASE RECORD
6. NEXT PAGE
1.
RUN TEST 02/16/10
2.
SETUP 10:24:25
3.
TEST PLANS
4.
DIAGNOSTIC