Vanguard EZCT-2000A - Manual (Page 45)

REV 1 EZCT-2000A USER’S MANUAL
41
3.4.6. Copying Test Records to a USB Flash Drive
You can easily copy test records stored in the EZCT-2000A’s Flash EEPROM to a connected USB
Flash drive using the steps below:
a. Make sure a USB Flash drive is inserted in the EZCT-2000A’s Flash drive port (“USB
MEM” port). Then start from the “START-UP” menu:
Press the [2] key (SETUP).
b. The following screen will be displayed:
Press the [4] key (SAVE/RES RECORD).
c. The following screen will be displayed:
Press the [2] key (COPY TO THUMB DRIVE).
d. The following screen will be displayed:
copy rec to thumb drv
1. copy single RECORD
2. copy all records
1. RESTORE RECORD
2. copy to thumb drive
1. RECORD ID
2. PRINT RECORD
3. RECORD DIRECTORY
4. SAVE/RES RECORD
5. ERASE RECORD
6. NEXT PAGE
1. RUN TEST 02/16/10
2. SETUP 10:24:25
3. TEST PLANS
4. DIAGNOSTIC