Vanguard EZCT-2000A - Manual (Page 31)

REV 1 EZCT-2000A USER’S MANUAL
27
3.4 Working With Test Records
3.4.1. Restoring and Printing a Test Record From Flash EEPROM
You can restore a test record from the EZCT-2000A’s Flash EEPROM to the working memory.
You can then print the restored test record on the unit’s built-in thermal printer. To restore a
test record:
a. Start from the “START-UP” menu:
Press the [2] key (SETUP).
b. The following screen will be displayed:
Press the
[4]
key (SAVE/RES RECORD).
c. The following screen will be displayed:
NOTE
If you have a USB Flash drive inserted in the EZCT-2000A’s “USB MEM” port,
the following screen will be displayed instead of the above screen:
Press the [1] key (RESTORE RECORD).
The following screen will be displayed:
1. RESTORE RECORD
2. COPY TO THUMB DRIVE
RESTORE RECORD
1. enter record number
2. scroll to select
1. RECORD ID
2. PRINT RECORD
3. RECORD DIRECTORY
4. SAVE/RES RECORD
5. ERASE RECORD
6. NEXT PAGE
1. RUN TEST 02/16/10
2. SETUP 10:24:25
3. TEST PLANS
4. DIAGNOSTIC