Vanguard CT-7000 - Manual (Page 48)

CT-7000 Operating Instructions
41
9.8 Shot Description
The CT-7000 has the capability for users to enter the breaker and other identification
information. The data usually consists of the names of the company, station, circuit and
manufacturer. Other information could be the breaker's model, serial number and the operator's
name. The identification data will print out on the header section of the tabulated report.
If the user saves the timing shot, the identification data will also be saved with the timing shot,
along with the time and date.
The user can input letters of the alphabet by utilizing the alphanumeric keys. To select the letter
"A," the user will need to press key numbered “2,” twice. To select the letter "C," the user will need
to press the key numbered “2,” four times and so on.
To move the cursor forward, press the “UP ARROW” key. To move the cursor backwards, use
the “DOWN ARROW” key. Use the “CLEAR” key to enter a space.
Table 14.0 Entering Shot Identification Header
STEP OPERATION ACTION DISPLAY
1 SELECT SET UP MENU. PRESS #3 KEY. 1. ANALYSIS POINTS
2. MEASUREMENT UNIT
3. SAVE / RESTORE
4. NEXT PAGE
2 SELECT NEXT PAGE. PRESS # 4 KEY. 1. SHOT DESCRIPTION
2. NUMBER OF CHANNELS
3. COMPUTER IF
4. SET CLOCK
3 SELECT SHOT DESCRIPTION. PRESS # 1 KEY. ENTER COMPANY NAME
XXXXXX
"ENTER" TO CONFIRM
4 ENTER COMPANY NAME. PRESS KEYS 0-9
AND
PRESS THE "ENTER"
KEY TO CONFIRM.
ENTER STATION NAME
XXXXXX
"ENTER" TO CONFIRM
5 ENTER STATION NAME. PRESS KEYS 0-9
AND
PRESS THE "ENTER"
KEY TO CONFIRM.
ENTER CIRCUIT NAME
XXXXXX
"ENTER" TO CONFIRM
6 ENTER CIRCUIT NAME. PRESS KEYS 0-9
AND
PRESS THE "ENTER"
KEY TO CONFIRM.
ENTER MANUFACTURER NAME
XXXXXX
"ENTER" TO CONFIRM
7 ENTER MANUFACTURER NAME. PRESS KEYS 0-9
AND
PRESS THE "ENTER"
KEY TO CONFIRM.
ENTER BREAKER MODEL
XXXXXX
"ENTER" TO CONFIRM