Teledyne LeCroy WaveStation SCPI Command Reference Manual - Manual (Page 29)

Command Reference
SYNC - Synchronize Command
DESCRIPTION Synchronizes the channel output on the back panel of the instrument to the
channel output on the front panel of the instrument.
SYNTAX
:SYNC {ON|OFF}
:= {C1|C2}
QUERY SYNTAX
:SYNC?
RESPONSE
:SYNC {ON|OFF}
VKEY - Virtual Key Command
DESCRIPTION Sends same function to the device as would the corresponding keyboard control.
You can send the control name or number in a single command, but not both.
SYNTAX
VirtualKEY VALUE,,STATE,1
:= {a name or number from the table below.}
Name Number Name Number
WaveStation 2000 and WaveStation 3000
KB_CHANNEL 33 KB_OUTPUT1 153
KB_FUNC1 28 KB_OUTPUT2 152
KB_FUNC2 23 KB_NUMBER_0 48
KB_FUNC3 18 KB_NUMBER_1 49
KB_FUNC4 13 KB_NUMBER_2 50
KB_FUNC5 8 KB_NUMBER_3 51
KB_UTILITY 11 KB_NUMBER_4 52
KB_HELP 12 KB_NUMBER_5 53
KB_MOD 15 KB_NUMBER_6 54
KB_SWEEP 16 KB_NUMBER_7 55
KB_BURST 17 KB_NUMBER_8 56
KB_KNOB_RIGHT 175 KB_NUMBER_9 57
KB_KNOB_LEFT 177 KB_POINT 46
KB_LEFT 44 KB_NEGATIVE 43
KB_RIGHT 40
922829 Rev C 27