Teledyne LeCroy WaveStation SCPI Command Reference Manual - Manual (Page 11)

Command Reference
Numeric values can be followed with multipliers and units modifying the value of the numeric
expression. The following table of mnemonics is recognized by WaveStation:
Multiplier Exponential Notation Suffix
EX 1E18 Exa-
PE 1E15 Peta-
T 1E12 Tera-
G 1E9 Giga-
MA 1E6 Mega-
K 1E3 Kilo-
M 1E-3 milli-
U 1E-6 micro-
N 1E-9 nano-
P 1E-12 pico-
F 1E-15 femto-
A 1E-18 atto-
Block Data
These are binary data values used to transfer waveforms between the WaveStation to the controller.
Buffer size limitations apply to block data:
• If data exceeding the WaveStation 512 byte input buffer limited is received, the excess is
discarded.
• If data exceeding the output queue is transmitted, commands that are not interpreted and
excess data are discarded.
922829 Rev C 9