Teledyne LeCroy IBTracer 4X - Users Manual Ver.2.20 - Manual (Page 81)

73
IBTracer 4X Protocol Analyzer User’s Manual CATC SW Version 2.2
7.3 Color Display Options
• Click the Colors tab on the Display Options screen.
You see the Colors screen:
Use this menu to customize the colors associated with each field in the Trace
View. You can experiment with this option to achieve the color combination
best suited to a particular graphic system. A brighter color might be
appropriate for a specific field that should stand out in the display (e.g. the
Packet Types).
Note
The colors of the following packet types cannot be changed:
Invalid Data (packet error) field (red) and Softbit Errors
(yellow.)
Two color fields are provided for packet number displays to differentiate
between pre-Trigger traffic and post-Trigger traffic.
• The packet that causes the Trigger and all the packets before it are
colored with the - color.
• The packet that follows a Trigger is colored with the + color.
• All packets are colored with a + color when there is no Trigger.